Crane Operator Job at Orion Corporation, Charleston, SC

OTdxbjBYRmQ1WkZjeVB0NERmMFdOekpJNkE9PQ==
  • Orion Corporation
  • Charleston, SC

Job Description

POSITION SUMMARY

This position is accountable for supporting field operations at marine project locations for Orion. Incumbents are responsible for the operation of cranes and other hoisting equipment in the construction or repair of marine terminals and dock facilities. Typically, they will work closely with the Project Superintendent, Barge Foreman, Welders, Boat Captain, Laborers, and other skilled or semi-skilled crafts persons.

The incumbent must support the guiding beliefs and core values of Orion which are centered on Safety, Quality, Delivery, and Teamwork, most importantly with each built upon the all-important foundation of Integrity.

SPECIFIC RESPONSIBILITIES

  • Works as assigned by the Barge Foreman to ensure the successful completion of on-going or new marine construction projects.
  • Assists in unloading and assembling of crane or other hoisting equipment to be used in marine construction activities.
  • Utilizes basic skills as a hook operator in swinging rig, raising and lowering crane boom, raising and lowering load lines on the crane.
  • Operates a hydraulic rubber tire or track crane equipped with a multiple part pick-up or single line hoist suspended from a boom by a cable.
  • Maneuvers and positions loads over designated areas in a smooth, safe manner.
  • Moves hand levers and depresses pedals to rotate chassis over lift load points.
  • Utilizes load charts to determine load and radius capabilities of the crane.
  • Assists in the installation of boom and hoisting cables on the hoisting equipment.
  • Performs maintenance duties such as cleaning, greasing, oiling, and fueling of assigned equipment.
  • Performs daily safety inspection of crane and recognizes possible problem areas such as worn cables, worn bands on hoisting mechanisms, broken gears, housing, etc.
  • Ensures that crane boom is properly secured upon the work barge prior to moving from one work location to another and otherwise demonstrates safe work practices in all aspects of crane operation.
  • Works closely with Barge Foreman, Welders, Helpers, Laborers, and other skilled craft persons to complete current projects in a safe, efficient, and timely manner.
  • Participates in Safety and Environmental initiatives that will contribute to compliance with State/Federal regulations and improve existing Company programs.

EMPLOYEE SAFETY AND COMPLIANCE

  • Responsible and accountable for incumbent's own personal safety.
  • Responsible and accountable for the safety of all co-workers and any others incumbent comes in contact with.
  • Authorized and obligated to stop work on any task or series of tasks whenever an unsafe condition or situation is anticipated or is observed.
  • Complies with all applicable laws, regulations, and Company policies and procedures and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
  • Reports any and all violations of applicable laws, regulations, or Company policies and procedures promptly and is subject to appropriate disciplinary action (including dismissal) for failure to do so.
  • Performs other related administrative and technical duties as may be assigned or requested by immediate supervision (such as certification training, safety training, procedure review, etc.).
  • All employees, current and former, must maintain confidentiality by not disclosing to others any confidential, proprietary, or trade secret information belonging to the Company.

POSITION REQUIREMENTS

A minimum of two (2) years crane operations experience on land and on barges or any equivalent combination of experience and training which provides the necessary crane operations skills, knowledge, and abilities is required. The incumbent must:

  • Must Be certified by an ANSI accredited agency.
  • Understand the basic functions and operations of various types of pile hammers -- diesel, air, hydraulic, and drop hammers.
  • Be able to read, understand, and use crane load charts to determine load and radius capabilities of cranes.
  • Have general knowledge of construction rigging -- use of slings, cable chokers, spreader bars, multi-part load blocks, etc.
  • Be capable of successfully passing a crane operations certification test.

The Company expects and requires incumbent and each of its other employees to observe and fulfill the above and all other safety responsibilities and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action up to and including termination of employment.

PHYSICAL/MENTAL REQUIREMENTS

The incumbent must be able to perform the essential functions of the job with or without reasonable workplace accommodation.

The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses, respirators, ear plugs, steel-toed shoes, or other protective equipment as required by the work performed and location the work is being done.

This individual must also have the ability to identify critical issues and formulate action plans with all levels of management, including corporate.

The incumbent must possess the ability to remain calm during emergencies and respond appropriately as dictated by the circumstance of the incident and as directed by the Safety Representative or other management personnel. Must be capable of evacuating the work area in a timely manner should an emergency situation arise.

In addition, Crane Operators must also be capable of:

  • Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which normally involves physically getting onto and off of work barges, boats, vessels, or dock facilities of varying heights and access parameters.
  • Visually seeing crane operations well (either naturally or with corrective lenses).
  • Standing, stooping, kneeling, squatting, climbing, or sitting for long periods of time.
  • Performing repetitive movements by feet, shoulders, arms, wrists, hands, and back in performance of work.
  • Climbing vertical ladders to heights of 40'-50'.
  • Working in confined spaces and at elevated heights.
  • Lifting objects up to 50 lbs. as required.
  • Carrying objects up to 50 lbs. as required.
  • Adapting to extreme temperature changes.
  • Adapting to outdoor conditions and prolonged exposure.
  • Remaining calm during emergencies and responding appropriately as dictated by the circumstance of the incident.

Compensation & Benefits:

An excellent compensation and benefits package is offered. Benefit plans include:

  • Medical, including Prescription Drugs
  • Dental
  • Vision
  • Life and AD&D Insurance
  • Short Term and Long-term Disability Insurance
  • Employee Assistance Plan
  • 401(k) Retirement Plan
  • Paid Time Off for Vacation, Sick, Holidays, Jury Duty and Bereavement Leave
  • Pre-Tax Health and Dependent Care Flexible Spending Accounts
  • Career Growth & Development

Candidate Response:

Qualified applicants should apply through the company career page:

Candidates that do not meet the minimum requirements will not be considered. The Company is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, gender identity and sexual orientation), age, national origin, genetic information, disability, veteran status or any other category protected by law.

Job Tags

Temporary work, Immediate start, Flexible hours

Similar Jobs

Science Applications International Corporation

Radio Frequency SME Job at Science Applications International Corporation

DescriptionSAIC is seeking a Radio Frequency SME. This role requires extensive knowledge in the development, manufacture, test and deployment of satellite communications systems to satisfy a range of customer needs. Strong experience working advanced technology concepts... 

Apex Water and Process Inc.

Pipe Welder Job at Apex Water and Process Inc.

 ...apply today and start your journey with Team Apex! JOB SUMMARY The primary objective of the Pipe Welder is to fabricate and assemble stainless steel piping systems and equipment through the use of fit up tables, tooling, welders, calculating shrinkage and measuring... 

TidalHealth

ED Tech Job at TidalHealth

 ...trials and research. Take advantage of our tuition assistance and scholarship programs to grow both personally and professionally. ED Tech Position Summary Under the specific direction of the Nurse, the Clinical Support Technician performs a variety of functions... 

Alchemer

Leadership & Education Internship: Winter Conclave Job at Alchemer

2027 Leadership and Education Internship ApplicationWe are so excited you are interested in interning for Beta! The Fraternity is looking for motivated and hardworking Beta collegians to serve as interns this upcoming year. If you want to give back to the Fraternity,... 

krg technology

Linux Admin Job at krg technology

Job Description ~3-5 years of experience in Red Hat Linux administration. Should be able to work on redhat RPM and deliver tar bundles for build automation ~ Ability to build and support Hadoop clusters ~ Ability to trouble-shooting bigdata eco-system tools hive...